RX Solutions for Motor Control

A Quick and Easy Solution for Designs that Require Motor Control

KEY FEATURES

Low cost demo board ready to drive sensor less PMAC Motors
Single PCB: inverter + MCU
Fully vector controlled & sensor-less
High frequency modulation >20KHz
Compact & small board USB powered
Renesas Tool-chain
Software library

Coming Q4 2011

RX Direct-Drive Solutions for TFT LCD

A Quick and Easy Solution to Add Color TFT-LCD to Your Design

KEY FEATURES

Low-cost 32-bit MCU solution to drive color TFT LCD panels up to WQVGA resolution
Only 5% loading on CPU when refreshing the TFT-LCD panel at 60Hz with ample bandwidth left for running the rest of the application
Free graphics API, library and examples for evaluating graphics
Third-party support for additional graphic requirements

Part number: YLCDRSKRX62NS

» For More Information

Wi-Fi Starter Kit using RX62N

A Quick and Easy Solution for Designs that Require Future-Proof 802.11N Connectivity, Ultra-Low Power and High Performance in a Single Solution

KEY FEATURES

Self-contained, compact size Wi-Fi
Modules for 802.11b/g/n or 802.11a/b/g/n
Standby current as low as 0.5mA;
Standby Associated current as low as 1.1mA
Connects to MCU using SDIO, SPI or UART interfaces
FREE Wi-Fi module API library
Throughput up to 8Mbps
Integrated encryption support for Open, WEP, WPA/WPA2-PSK (TKIP and AES) modes of operation
Wi-Fi modules with or without integrated TCP/IP stack
May be used with or without RTOS

KIT INCLUDES

RX62N RDK board
- - Supports 802.11n
- - FCC/IC/CE certified
- - API Library
Redpine Wi-Fi module
Connect to RX62N via SPI
Up and running in minutes

Part number: RS-RX62N-2201

Sold through Redpine Signals

» Click here to link to Redpine.

RX62Ncore module

The RX62Ncore module is designed around the Renesas high performance and highly integrated RX62N MCU. The RX62Ncore is ideally suited for product prototyping and integration into OEM devices where a flexible USB, Ethernet and/or PC software interface is required. The RX62Ncore can easily be integrated to new designs to provide a turnkey integration solution. RPA saves you time and development costs by providing a well tested software interface and robust hardware drivers. And did we mention that our RX62Ncore is tiny at 47mm x 57mm?

The RX62Ncore module has the tools you need to jump start your embedded project. Features include Ethernet, USB2.0, expansion connectors and a broad range of peripherals including timers, real time clock, A-D and D-A converters, DMA controller and SDRAM interface. These are all routed to two 50-pin user-friendly I/O connectors which provide end users off-card access to the on-chip peripherals. In addition, all the supporting circuitry is included to free the designer to focus on other tasks at hand.

Click here to learn more about the RX62Ncore module or call us at 607-771-0393